86-411-84174804,84174814
Room 403, Building D5, Chuntianyuan, Ganjingzi District, Dalian, Liaoning, China (Mainland)
The mould flux main used in the continuous casting process. It has lots of advanges on iron and steel smelting. Mould flux can avoid heat loss effectively, prevent molten steel from secondary oxidation, adsorb the harmful inclusions, can prevent the steel surface. It has the character of great heat preservation, strong spreading ability and improving the product quality.
The ultra Low Carbon Steel use the mold slag XLC-X series
Product Appearance, Hollow Particle
Steel Variety,Carbon composite<30 ppm IF series, Electrician Series Steel
Cross section(mm2):200230x10001500
Throwing Speed(m/min):0.8-1.3
| Melting Charateristics(℃) | |||
| Soften | 1085 | 1050 | 1100 |
| Melt | 1115 | 1080 | 1140 |
| Flow | 1138 | 1110 | 1170 |
| Melting Time(S.1300℃) | 21 | 10 | 30 |
| Viscosity(Pa.S.1300℃) | 0.173 | 0.11 | 0.23 |
| Sieve Analysis(0.2-1mm) | ≥80% | 75% | 95% |
Low Carbon Steel and Low Alloy Steel use the protection slag XLD-X series
Product Appearance, Hollow Particle
Steel Variety,Carbon composite 0.05-01%,Low Carbon and Low Alloy Steel
Cross section(mm2):200230x1000-16001860
Throwing Speed(m/min):1-1.5
| Melting Charateristics(℃) | |||
| Soften | 1067 | 1030 | 1090 |
| Melt | 1080 | 1050 | 1110 |
| Flow | 1140 | 1110 | 1170 |
| Melting Time(S.1300℃) | 36 | 20 | 50 |
| Viscosity(Pa.S.1300℃) | 0.177 | 0.1 | 0.25 |
| Sieve Analysis(0.2-1mm) | ≥80% | 75% |
95% |
The Carbon Low Alloy Structural Steel use the protection slag XLZ-X series
Product Appearance, Hollow Particle
Adaptable Steel Variety,Carbon composite 0.1-0.25% Low Alloy Steel
Adaptable Cross section(mm2):2001000-16001860
Adaptable Throwing Speed(m/min):1.0-1.4
| Melting Charateristics(℃) | |||
| Soften | 1071 | 1040 | 1100 |
| Melt | 1093 | 1060 | 1120 |
| Flow | 1126 | 1110 | 1160 |
| Melting Time(S.1300℃) | 41 | 20 | 60 |
| Viscosity(Pa.S.1300℃) | 0.122 | 0.06 | 0.18 |
| Sieve Analysis(0.2-1mm) | ≥80% | 75% | 95% |
The High Carbon Steel Low Alloy Structural Steel use the protection slag XLG-X series
Product Appearance, Hollow Particle
Steel Variety,Carbon composite 0.05-0.1% Low Cabon and Low Alloy Steel
Adaptable Cross section(mm2):200230250x1000-16001860
Adaptable Throwing Speed(m/min):1.0-1.5
| Melting Charateristics(℃) | |||
| Soften | 1067 | 1030 | 1090 |
| Melt | 1080 | 1050 | 1110 |
| Flow | 1146 | 1110 | 1170 |
| Melting Time(S.1300℃) | 36 | 20 | 50 |
| Viscosity(Pa.S.1300℃) | 0.177 | 0.1 | 0.25 |
| Sieve Analysis(0.2-1mm) | ≥80% | 75% | 95% |
The Stainless Steel Power use the protection slag XLBX-X series
Product Appearance, Hollow Particle
Adaptable Steel Variety,Stainless Steel Class
Adaptable Cross section(mm2):180-230250x900-1650
Adaptable Throwing Speed(m/min):0.8-1.2
| Melting Charateristics(℃) | |||
| Soften | 1108 | 1080 | 1140 |
| Melt | 1120 | 1090 | 1150 |
| Flow | 1140 | 1110 | 1170 |
| Melting Time(S.1300℃) | 23 | 15 | 40 |
| Viscosity(Pa.S.1300℃) | 0.136 | 0.076 | 0.196 |
| Sieve Analysis(0.2-1mm) | ≥80% | 75% | 95% |
Rare Earth Steel use the protection slag XLBX-X series
Product Appearance, Hollow Particle
Adaptable Steel Variety,Car Beam, Weather Resistance Steel,09CuPXu
Adaptable Cross section(mm2):200230250x1000-16001860
Adaptable Throwing Speed(m/min):0.9-1.3
| Melting Charateristics(℃) | |||
| Soften | 1062 | 1030 | 1190 |
| Melt | 1075 | 1050 | 1110 |
| Flow | 1089 | 1060 | 1200 |
| Melting Time(S.1300℃) | 40 | 25 | 55 |
| Viscosity(Pa.S.1300℃) | 0.115 | 0.55 | 0.175 |
| Sieve Analysis(0.2-1mm) | ≥80% | 75% | 95% |
Medium Carbon Steel use the protection slag XLW(D)F-X series
(Non-fluoride or Low - Fluorine)
Product Appearance, Hollow Particle
Adaptable Steel Variety, Medium Carbon Steel
Adaptable Cross section(mm2):210x1350
Adaptable Throwing Speed(m/min):0.9-1.2
| Melting Charateristics(℃) | |||
| Soften | 1031 | 1000 | 1060 |
| Melt | 1063 | 1030 | 1090 |
| Flow | 1075 | 1045 | 1105 |
| Melting Time(S.1300℃) | 29 | 15 | 45 |
| Viscosity(Pa.S.1300℃) | 0.21 | 0.35 | 0.27 |
| Sieve Analysis(0.2-1mm) | ≥80% | 75% | 95% |
(Non-fluoride or Low - Fluorine)
Product Appearance, Hollow Particle
Adaptable Steel Variety, All kind of steel
| Melting Charateristics(℃) | |||
| Soften | 966 | 910 | 1010 |
| Melt | 1000 | 950 | 1050 |
| Flow | 1021 | 970 | 1070 |
| Melting Time(S.1300℃) | 14 | 5 | 25 |
| Viscosity(Pa.S.1300℃) | 0.098 | 0.06 | 0.13 |
| Sieve Analysis(0.2-1mm) | ≥80% | 75% | 95% |
1. You will get our catalogue
2. When you send the inquiry, we will give you detailed quotation and technical data.
3. Your inquiry related to our products or prices will be replied in 24hours.
4. Manufacturer with large capacity, ensure the fast production cycle after confirmed the order.
5. Our professional technicians will answer your entire enquiry in patient.
6. To meet the refractory solutions, we can serve as your instructions.
7. Protection of sales area and private information for our entire customer.
1, Good melting property and steady quality
2, Suitable for different casting conditions
3, Can ensure no shell and flux strip in mold
4, with even whip mark and without defect on the surface of casting blocks
1. Net weight 25kg per units; 1 metric ton in P.P bag (waterproofing) with sling.
2. Net weight 25kg per units; 1 metric ton on pallet with plastic film.
3. as customer's request
